Rolling Contact Type Servo Stabilizer
Approx. Rs 80,000 / Piece
- Minimum Order Quantity: 1 Piece
- Brand: Servokon
- Application: Indoor Type
- Control Type: Micro controller
- Output Voltage: 400 +/-1% (phase to neutral
- Cooling Type: Oil cooled
- Frequency: 50 Hz
- Efficiency: more than 99 %
- Warranty: 5 Years
- Speed Correction: 8 to 10 Volt/ sec
- Mounting: Floor
- Response Time: Instantaneous (mili sec)
- Duty Cycle: Continuous 24 Hours at 100% Load
- Is It Portable: Portable
- Automatic Grade: Automatic
- Correction Speed: 8 to 10 Volt/ sec
- Input Window: 340-460 volts (phase to neutral)
- Type: Suitable for Unbalanced Load Balance supply
- Usage/Application: Indoor Type
- Working Range: 340-460 volts (phase to neutral)
- I deal in: New Only
Servokon is a reliable supplier of high quality rolling contact type voltage controller that is used to overcome problems like electricity fluctuation. We understand the fact that even a minor fluctuation can not only halt the entire system but damages the electric appliance or devices as well. This type of controller protects the appliances by providing a constant output voltage when the voltage coming from the source of power fluctuates. We have an in-house manufacturing unit for manufacturing the voltage controller with utmost precision and at par with international standards. Highest degree of electrical insulation and windings makes these controllers suitable for both indoor as well as outdoor electric installations.
Quantitative advantages of automatic voltage controller at various fluctuation levels
Voltage regulators with carbon assembly Carbon wound buck n boost series transformer
SpecificationsInput Voltage Variation | % Reduction in Breakdown Possible | Approx. Power Saving Possible |
Motor Load Below 30 HP. | Lighting Load | Motor Load Below 30 HP. | Lighting Load |
380-400 volts | Nil | Nil | Nil | Nil & Servo Stabilizer Required |
380-420 volts | 5% | 10% | 3% | 5% |
380-440 volts | 10% | 20% | 5% | 10% |
360-460 volts | 40% | 40% | 7% | 20% |
360-480 volts | 60% | 60% | 10% | 30% |
320-500 volts | 80% | 80% | 15% | 37% |
Advantages of Rolling Contact Type Servo Stabilizer
- Superior insulation and windings
- Suitable for indoor and outdoor installation
- Motor draws 15 - 20% lesser current
- Motor inside the controller can withstand the high current
- Equipped with contractors, relays and switch gears
- Reduction in unwanted loss of energy
- 5 Years Guarantee
- Protection of Electrical equipment
- Improve power factor in situation of high voltage
- First-rate efficiency with reduced MDI
Applications of Rolling Contact Type Servo Stabilizer
Rolling Contact Type Voltage controllers are catered to the below mentioned industries:
- Distilleries & Beverages
- Cement Plant
- Cold Storage
- Food processing Units
- Pharmaceutical Units
- Flour Mills Engineering Units
- Rolling Mills
- High Buildings Hospitals & Nursing Home etc
- Paper Mills
- Textile Mills
- Rubber Industries
Additional Information:- Production Capacity: As Per Requirement
- Delivery Time: 3-4 weeks
Rolling Contact Type Voltage Controller
Approx. Rs 80,000 / Piece
- Minimum Order Quantity: 1 Piece
- Efficiency: more than 99 %
- Phase: Three Phase
- Input Voltage: 340-460 volts
- Type: Manual, Automatic
- Output Voltage: 400 Volts +/-1%
- Brand: Servokon
- Response Time: Instantaneous
- Warranty: 5 Years Guarantee
- Frequency: 50 Hz
We are involved in offering a comprehensive collection of Rolling Contact Type Voltage Controller. These voltage controllers are used to produce a steady output voltage despite fluctuations of input voltage. Our controllers possess superior efficiency, life span, insulation and windings and are suitable both for Indoor and Outdoor installation. Their installation ensures the smooth functioning of the motor which draws 15 - 20% lesser current and correspondingly the relay setting can be reduced by 15- 20%. In case single phasing occurs, the relay will trip in 40-50 seconds. The Motor can withstand the high current for this period and will be safe. Also, the relays, contractors, switch gears, etc. incorporated with the motor will be safe.
The Rolling Contact Type Voltage Controller we offer are developed by high quality raw material to maintain lowest of unwanted Losses. Our clients acknowledge our products for their salient features such as high quality, reliability, durability, high efficiency, superior performance, reasonable rates, etc. Apart from this, our product is available with an additional feature of '5 Years Guarantee'.
Table below gives approximate quantitative advantages of automatic voltage controller at various fluctuation levels:Input Voltage Variation | % Reduction in Breakdown Possible | Approx. Power Saving Possible |
Motor Load Below 30 HP. | Lighting Load | Motor Load Below 30 HP. | Lighting Load |
380-400 volts | Nil | Nil | Nil | Nil Servo Stabilizer Required |
380-420 volts | 5% | 10% | 3% | 5% |
380-440 volts | 10% | 20% | 5% | 10% |
360-460 volts | 40% | 40% | 7% | 20% |
360-480 volts | 60% | 60% | 10% | 30% |
320-500 volts | 80% | 80% | 15% | 37% |
Advantages- Better efficiency in plant and thus reducing MDI.
- It helps in reducing the breakdown of electrical equipment.
- It is important to improve your power factor in case of high voltage.
- One can derive power saving by using this automatic rolling contact type voltage regulator.
- Saves Energy.
- Protection of Electrical equipment.
- 80% depreciation as per Income Tax.
Applications- Cement Plant
- Cold Storage
- Distilleries Beverages
- Flour Mills Engineering Units
- Food processing Units
- High Buildings Hospitals Nursing Home etc.
- Paper Mills
- Pharmaceutical Units
- Rolling Mills
- Rubber Industries
- Textile Mills
Additional Information:- Production Capacity: As Per Requirement
- Delivery Time: 3-4 weeks